![]() ![]() Now, you are able to use the Wake on LAN feature. The computer will auto restart and then enter Windows.Press Hotkey and select ⑦ to save & exit setup.Enable/Disable IPv4 PXE or IPv6 PXE depending on your requirement ⑥.After entering the Network Stack Configuration, select ④ and set ⑤.After entering the Advanced Mode, select screen ②, and then select ③.After entering the BIOS Utility, go to the Advanced Mode by pressing Hotkey or use cursor to click ①.Here you can learn more about How to enter BIOS configuration. While the computer isn’t powered on yet, press and hold the key of the keyboard, and then press the (Do not release key until the BIOS configuration display.).Select the tab ⑥, check the box to ⑦, and then select ⑧.Įnable the Wake on LAN feature in BIOS configuration.Note: The Ethernet device name may be different based on different models. Place your computer in Sleep or Hibernate mode (Start > Power > Sleep / Hibernate), and press the Wake button on the Wake On Lan app. Check the arrow next to ③, then right-click ④ to select ⑤.Right-click the icon on the taskbar ①, then select ②.Unselect the checkbox in front of ⑤, then select ⑥.Īllow this device to wake the computer from Ethernet Controller Setting.Type and search in the Windows search bar ①, then click ②.Wake-on-Touch is only available on devices that explicitly opt in per the guidance below. Using a pen to wake the screen is not supported. This feature allows users to touch a device’s screen with their finger to wake it from sleep. To use the Wake on LAN feature, you need to adjust the relevant settings of Windows OS and BIOS configuration first. If you are unable to send the magic packet to your PC from another computer, an alternative option is sending it from another device like a smartphone or tablet. Wake-on-Touch is a new, optional capability coming to Windows 11 devices. Note: The Wake on LAN feature is available depending on the computer model. Right click your network card and select properties, which will show you the details in a separate window. This article describes how to enable the Wake on LAN feature for ASUS laptop or All-in-One PC. The Wake on LAN feature lets you wake the system up from sleep or hibernate mode through the network. Finally, select the “Allow This Device To Wake the Computer” option.How to enable Wake on LAN (WOL) feature.Now, navigate to HID Keyboard Device/HID Mouse > Properties > Power Management.Locate the “Keyboard” or “Mouse” option.27 Docking Your Tablet to the Keyboard Dock. Open “Device Manager” on your computer. Originally, Windows (dual-booted) would not allow wake from keyboard/USB either, so I went into BIOS and.You can allow your mouse and keyboard to wake your computer up from sleep in seconds just by wiggling the mouse or pressing the keys. Method #3: Allow Mouse and Keyboard To Wake Up the Computer Finally, replace the damaged cable with a new one and see if you can see your computer desktop. ![]() If all seems good, check for any visible damage to the cable.First, ensure the monitor power cable is firmly attached to the back of the monitor and the wall outlet.To fix the issue, examine the power cable in the following way. Method #2: Examine the Power CableĪ loosely connected or damaged power cable will not let your monitor function properly on a desktop computer. Next, boot from “Safe Mode” once and see if the sleep mode feature is functioning properly. If the screen is completely off, press and hold the power button for at least 5 minutes until your computer automatically shuts down. ![]() ![]()
0 Comments
Leave a Reply. |